Best picks

9 Best Sublimation Paper for Tumblers (November 2026)

Updated on · By the 10 Top Rated Reviews team

The best sublimation paper for tumblers include the A-SUB Sublimation Paper 8.5x11 Inch 110 Sheets for most tumbler makers, the HTVRONT Sublimation Paper for T-Shirts & Mug for mixed tumbler and shirt work, and the HTVRONT Sublimation Paper 11x17 Inch for full-wrap tumbler designs.

On this page (8 sections)
  1. Which sublimation paper for tumblers fits your blank and printer
  2. How to compare sublimation paper for tumblers
  3. What size sublimation paper fits a tumbler wrap
  4. How do paper weight and transfer rate affect tumbler prints
  5. What printer and ink work with sublimation paper for tumblers
  6. How should you print, tape and press a tumbler wrap
  7. How should you store sublimation paper between runs
  8. Our verdict on the best sublimation paper for tumblers

The best sublimation paper for tumblers is the A-SUB 8.5x11 inch 110-sheet pack for most makers. It pairs a 125g coated sheet with a fast dry finish and a stated transfer rate of at least 98%.

That mix suits standard tumbler wraps, coatings and heat press work.

Tumbler blanks punish weak paper in ways flat shirts do not. A wrap must sit flush around a curve, hold ink through the press and release cleanly.

Thin paper can wrinkle at the seam. Heavy paper can bridge a taper.

Size, weight and coating all matter here.

Our score weighs specs, features and buyer feedback against what tumbler makers need. We compared sheet size, weight, count, drying speed and stated transfer rate across these nine packs.

Start with what size is sublimation paper if you are unsure between 8.5x11 inch and 11x17 inch sheets. If you also print mugs, our best sublimation paper for mugs guide covers smaller coated blanks.

Our picks at a glance

  1. 1 A-SUB Sublimation Paper 8.5x11 Inch 110 Sheets
    Best for most tumbler makers

    A-SUB Sublimation Paper 8.5x11 Inch 110 Sheets

    9.7/10 our score

    See it on Amazon
  2. 2 HTVRONT Sublimation Paper for T-Shirts & Mug
    Best for mixed tumbler and shirt work

    HTVRONT Sublimation Paper for T-Shirts & Mug

    9.6/10 our score

    See it on Amazon
  3. 3 HTVRONT Sublimation Paper 11x17 Inch
    Best for full-wrap tumbler designs

    HTVRONT Sublimation Paper 11x17 Inch

    9.5/10 our score

    See it on Amazon
  1. 4Hiipoo Sublimation Paper 8.5x11 Inch

    Hiipoo Sublimation Paper 8.5x11 Inch

    Best for guided print settings
    Check it
  2. 5A-SUB Sublimation Paper 8.5x11 Inch

    A-SUB Sublimation Paper 8.5x11 Inch

    Best for economical everyday batches
    Check it
  3. 6Lzerking Sublimation Paper 8.5x11 Inch 125gsm

    Lzerking Sublimation Paper 8.5x11 Inch 125gsm

    Best for high-volume tumbler runs
    Check it
  4. 7Koala Sublimation Paper 8.5x11 Inches 150 sheets

    Koala Sublimation Paper 8.5x11 Inches 150 sheets

    Best for thin paper that wraps tumblers
    Check it
  5. 8Koala Sublimation Paper 8.5x11 Inch 100 Sheets

    Koala Sublimation Paper 8.5x11 Inch 100 Sheets

    Best for thick paper and small batches
    Check it
  6. 9Joyclub Sublimation Paper 8.5x11 Inch 110 SheetsCheck it

Which sublimation paper for tumblers fits your blank and printer

The A-SUB 125g pack leads for everyday 8.5x11 inch work. The HTVRONT 11x17 inch pack leads for tall full wraps.

The Lzerking 400-sheet pack leads for volume.

1

A-SUB Sublimation Paper 8.5x11 Inch 110 Sheets: Best for most tumbler makers

A-SUB Sublimation Paper 8.5x11 Inch 110 Sheets, sublimation paper for tumblers
9.7/10Our score
  • 8.5x11 inch, 110 sheets
  • 125g coated paper
  • Fast dry, no fracturing
  • A-SUB says transfer rate is at least 98%

A 125g 8.5x11 inch sheet in a 110-sheet pack, made for coated tumblers, mugs and other sublimation blanks.

See it on Amazon

Pros

  • Heaviest-feeling 8.5x11 option in this group
  • 110 sheets for regular production
  • Fast dry coating

Cons

  • 8.5x11 inch size may need trimming for tall wraps
  • Works only with sublimation ink

This A-SUB pack suits tumbler makers who print standard 8.5x11 inch wraps again and again. The sheet is 125g and coated, so it holds a firm body during taping and pressing.

At 110 sheets, it covers regular batches without a bulk storage problem.

A-SUB says the transfer rate is at least 98% and the sheet dries fast with no fracturing. That fast dry finish helps when you print, cut and tape a wrap in one session.

The coated finish also helps the sheet release cleanly after heating, which reduces the risk of faint edge marks on a tumbler.

The 8.5x11 inch size fits many tumblers and mugs, though tall blanks may need careful trimming. The paper is listed for white or light colored polyester, material with cotton content up to 30%, premium ceramic and tile, phone cases, metal plates and coated mugs.

That range suits shops that move between drinkware and flat coated items.

Paper weight is the trade-off. At 125g, this sheet is heavier than 105g options, so it can feel less flexible on a strong taper.

Tape the edges flat and check the seam before the press. Use only sublimation ink in a compatible printer, since regular ink does not work.

Choose this pack for coated tumblers, mugs and plates. Skip it if your printer cannot take flat sheets well or if you need a full 11x17 inch wrap.

A-SUB Sublimation Paper 8.5x11 Inch 110 SheetsCheck it on Amazon
2

HTVRONT Sublimation Paper for T-Shirts & Mug: Best for mixed tumbler and shirt work

HTVRONT Sublimation Paper for T-Shirts & Mug, sublimation paper for tumblers
9.6/10Our score
  • 8.5x11 inch, 150 sheets
  • 120g coated paper
  • Fast drying
  • HTVRONT says transfer rate is over 98%

A 150-sheet pack of 120g 8.5x11 inch paper that also suits T-shirts, mugs, phone cases and other coated blanks.

See it on Amazon

Pros

  • 150 sheets per pack
  • 120g weight suits tumbler wraps
  • Fast drying and ink saving

Cons

  • No 11x17 inch option in this pack
  • Store away from heat and humidity

This HTVRONT pack suits makers who split time between tumblers, T-shirts and mugs. The sheet is 8.5x11 inch, 120g and coated, with 150 sheets in the pack.

That count gives you room to test wraps without running low.

HTVRONT says the transfer rate is over 98%, with fast drying and greater ink saving. The coating is made to resist cracking, fading and wrinkling through washing, high heat and sun.

For tumblers, that means a wrap that holds line sharpness under the press and keeps small text and fine detail clear after the transfer.

The 120g body is a middle ground. It is lighter than the 125g A-SUB sheet, so it wraps curves with less effort.

It is heavier than 105g sheets, so it stays flatter when taped. The listed lay-flat performance helps at the seam, where a lifted edge can let heat escape and leave a pale line on the coating.

Application range is wide. HTVRONT lists T-shirts, pillows, canvas bags, ceramic mugs, phone cases, puzzles, metal plates and key chains.

That breadth suits makers who want one pack for drinkware and fabric. Store the pack in a cool, dry place and return unused sheets to the box.

Choose it for mixed blanks and light polyester fabric. Skip it if you need an 11x17 inch sheet for a tall full wrap.

HTVRONT Sublimation Paper for T-Shirts & MugCheck it on Amazon
3

HTVRONT Sublimation Paper 11x17 Inch: Best for full-wrap tumbler designs

HTVRONT Sublimation Paper 11x17 Inch, sublimation paper for tumblers
9.5/10Our score
  • 11x17 inch, 120 sheets
  • Thicker coating
  • Quick drying
  • HTVRONT says transfer rate is over 98%

A larger 11x17 inch sheet that lets tall tumbler wraps print in one piece, with a logo pattern on the back to mark the printing side.

See it on Amazon

Pros

  • Covers tall tumbler wraps without seams
  • 120 sheets for ongoing work
  • Back pattern shows the printing side

Cons

  • Needs a printer that accepts 11x17 inch paper
  • Larger sheets can be harder to position evenly

This HTVRONT pack suits tumblers where a seam would ruin the design. The sheet is 11x17 inch with 120 sheets, so a tall wrap can print in one piece.

That one-piece print is the main reason to choose this size.

HTVRONT says the transfer rate is over 98%, and the thicker coating is made to keep ink from bleeding through. More ink makes its way to the substrate, which helps with dense color and photo style designs.

The sheet dries fast, so you can move from print to press with less wait.

A logo pattern on the back marks the printing side. That cue matters more on a large sheet, since a wrong-side print wastes a full wrap.

The paper is also described as thicker and sturdier, which helps prevent creasing and printer jams during sublimation printing.

The trade-off is printer fit. You need a printer that accepts 11x17 inch paper.

Larger sheets also take more care to position evenly around a tumbler. Trim edges cleanly and tape the seam flat.

The paper suits light polyester fabric and coated items such as mugs, phone cases, puzzles and metal plates, with cotton content up to 30%.

Choose this pack for full-wrap tumblers and larger designs. Skip it if your printer only takes 8.5x11 inch sheets.

HTVRONT Sublimation Paper 11x17 InchCheck it on Amazon
4

Hiipoo Sublimation Paper 8.5x11 Inch: Best for guided print settings

Hiipoo Sublimation Paper 8.5x11 Inch, sublimation paper for tumblers
9.4/10Our score
  • 8.5x11 inch, 110 sheets
  • 120g paper
  • Instant dry
  • Hiipoo says transfer rate is over 98%

A 120g 8.5x11 inch pack with clear mirror-image and printer-setting guidance, made for tumblers, mugs and light fabrics.

See it on Amazon

Pros

  • Instant dry finish
  • 110 sheets per pack
  • Clear printing instructions

Cons

  • 8.5x11 inch size may need trimming
  • Pink back must be kept away from the print side

This Hiipoo pack suits makers who want clear print guidance. The sheet is 8.5x11 inch, 120g, with 110 sheets per pack.

Hiipoo says the sheet comes out of the printer dry and the transfer rate is over 98%.

The white side is the printing side and the pink side is the back. That color cue helps you load the sheet the right way.

Hiipoo also gives plain steps: print with sublimation ink, check the mirror image setting, set the press, then peel after heating.

The 120g body gives good elasticity and flatness, which helps with no gear prints. For tumblers, that flatness matters at the tape line.

The thicker design is meant to stop the paper rolling in the printer, so the design stays true at the edges. Press at the recommended settings for your blank and check the result before you change settings.

Hiipoo lists light fabrics with up to 30% cotton, mugs, tumblers, phone cases, puzzles, mouse pads, ceramic plates, bags and cups. That list suits gift work across holidays and birthdays.

The package includes instructions on the back, which helps new makers set paper type and quality on the first run.

The trade-off is size. This is an 8.5x11 inch pack, so tall wraps may need trimming or piecing.

Choose it for guided setup. Skip it if you need a larger sheet or a much larger sheet count.

Hiipoo Sublimation Paper 8.5x11 InchCheck it on Amazon
5

A-SUB Sublimation Paper 8.5x11 Inch: Best for economical everyday batches

A-SUB Sublimation Paper 8.5x11 Inch, sublimation paper for tumblers
9.3/10Our score
  • 8.5x11 inch, 150 sheets
  • 105g paper
  • Instant dry
  • A-SUB says transfer rate is over 98%

A lighter 105g 8.5x11 inch sheet in a 150-sheet pack, aimed at lower ink use and economical batches.

See it on Amazon

Pros

  • 150 sheets for the pack size
  • 105g thin sheet wraps curves easily
  • Instant dry coating

Cons

  • Lighter than 120g and 125g options
  • Less rigid when you tape a wrap

This A-SUB pack suits makers who value a lower ink use per design. The sheet is 105g, 8.5x11 inch, with 150 sheets.

A-SUB says the transfer rate is over 98% and the sheet is instant dry.

A lighter 105g paper wraps curves with less fight than 120g or 125g sheets. That helps on tapered tumblers and small mugs.

It also uses less ink per sheet, which lowers cost when you print many designs. A-SUB links that lower ink use to reduced production cost, which matters when you press daily.

The trade-off is body. A thinner sheet can shift or wrinkle if your tape job is loose.

Tape the wrap tight, check for air gaps and avoid touching the printed side. The paper works on light polyester fabric and coated hard objects, so it covers tumblers, mugs and other blanks that carry a sublimation coating.

A-SUB notes imported raw materials from Europe for more stable quality. For tumbler work, stable coating means more repeatable color across a batch.

That repeatability helps when you sell sets or refill a shop listing with the same design.

Choose this pack for economical batches and curved blanks. Skip it if you prefer a heavier sheet that holds its shape more firmly.

A-SUB Sublimation Paper 8.5x11 InchCheck it on Amazon
6

Lzerking Sublimation Paper 8.5x11 Inch 125gsm: Best for high-volume tumbler runs

Lzerking Sublimation Paper 8.5x11 Inch 125gsm, sublimation paper for tumblers
9.2/10Our score
  • 8.5x11 inch, 400 sheets
  • 125gsm paper
  • Fast drying
  • Lzerking says transfer rate is up to 98%

A 400-sheet pack of 125gsm 8.5x11 inch paper for makers who print the same tumbler sizes again and again.

See it on Amazon

Pros

  • 400 sheets in one pack
  • 125gsm weight
  • White printing side is easy to spot

Cons

  • Large pack needs dry storage space
  • 8.5x11 inch size only in this pack

This Lzerking pack suits shops that print tumblers in volume. The sheet is 8.5x11 inch, 125gsm, with 400 sheets.

That count is the largest in this group, so you can run long sessions without opening a new pack.

Lzerking says the transfer rate is up to 98%, with efficient ink absorption and rapid drying. The white side is for printing and the other side is non-printable.

Mirror the image, set time and temperature, then transfer with a press or cup machine.

The 125gsm weight gives a firm sheet for taping. That helps on straight-sided tumblers and flat wraps.

The matte finish and recyclable material also suit makers who prefer a matte sheet feel. Rapid drying helps keep a queue moving when you print, trim and tape in sequence.

The range of blanks is broad. Lzerking lists clothing, headscarves, handbags, hats, curtains, pillows, tablecloths, ceramic mugs, plates, school bags, mouse pads, metal plates and gloves.

For tumbler shops, that breadth supports add-on items such as mousepads and plates in the same run.

The trade-off is storage. A 400-sheet pack needs dry space and should stay in its box between runs.

On strong tapers, a firm sheet needs careful trimming so the edge does not lift. Choose it for repeat orders.

Skip it if you print a few tumblers at a time.

Lzerking Sublimation Paper 8.5x11 Inch 125gsmCheck it on Amazon
7

Koala Sublimation Paper 8.5x11 Inches 150 sheets: Best for thin paper that wraps tumblers

Koala Sublimation Paper 8.5x11 Inches 150 sheets, sublimation paper for tumblers
8.8/10Our score
  • 8.5x11 inch, 150 sheets
  • 105gsm paper
  • Comes out of the printer dry
  • Koala says transfer rate is over 98%

A thin 105gsm 8.5x11 inch sheet that Koala says wraps tumblers and mugs with ease, in a 150-sheet pack.

See it on Amazon

Pros

  • Thin sheet for curved blanks
  • 150 sheets per pack
  • Logo pattern on the back

Cons

  • 105gsm is lighter than heavier picks
  • Tape flat wraps carefully to avoid shifting

This Koala pack suits tumblers and mugs where thin paper wraps best. The sheet is 105gsm, 8.5x11 inch, with 150 sheets.

Koala says it comes out of the printer dry and wraps tumblers or mugs with ease.

The stated transfer rate is over 98%, with vibrant color and greater ink saving. A logo pattern on the back helps you find the printable side fast.

That cue saves wasted sheets when you print in a batch.

The trade-off is the same as other 105g paper. Thin paper is easy to curve, but it needs firm taping to stay put on the blank.

Press the seam flat and check the wrap before heat. The paper works with light polyester fabric and coated items, and only with sublimation ink.

Application range is wide. Koala lists T-shirts, socks, pillows, canvas bags, mouse pads, tumblers, ceramic mugs, phone cases, puzzles, metal plates and key chains.

That range suits gift sets where a tumbler pairs with smaller coated items. Koala also names compatible converted printers such as ET2720, ET2830, ET4800, ET7720, ET15000 and F570.

Each package holds 150 sheets plus transfer instruction. Choose it for curved blanks and 150-sheet value.

Skip it if you want a heavier sheet for large flat designs.

Koala Sublimation Paper 8.5x11 Inches 150 sheetsCheck it on Amazon
8

Koala Sublimation Paper 8.5x11 Inch 100 Sheets: Best for thick paper and small batches

Koala Sublimation Paper 8.5x11 Inch 100 Sheets, sublimation paper for tumblers
8.5/10Our score
  • 8.5x11 inch, 100 sheets
  • Thick coated paper
  • Fast drying
  • Koala says transfer rate is over 98%

A thicker 8.5x11 inch Koala sheet in a 100-sheet pack, made to hold more ink and resist curl during transfer.

See it on Amazon

Pros

  • Thick sheet holds more ink
  • 100 sheets for smaller runs
  • Logo pattern marks the back

Cons

  • Fewer sheets than 150-sheet packs
  • Thicker paper needs firm, even taping

This Koala pack suits makers who want a thick sheet in a smaller pack. The sheet is 8.5x11 inch, with 100 sheets, and Koala calls it thick paper that holds more ink.

The coating is made to resist curl during transfer, with fast drying and vivid colors. For tumblers, a thick sheet can hold a wrap flat under tape and press.

A logo pattern on the back marks the printable side.

The trade-off is pack size. At 100 sheets, it runs out sooner than 150-sheet packs.

Thickness also means you should tape with care so the edge sits flush on a curve. The paper suits tumblers, mugs, phone cases and other coated blanks, with sublimation ink only.

Koala lists T-shirts, socks, pillows, canvas bags, mouse pads, tumblers, ceramic mugs, phone cases, puzzles, metal plates and key chains. That list suits small gift runs and seasonal crafts.

The thicker body can hold the greatest amount of ink, which helps bold blocks of color and sharp detail.

Koala notes fine detail and vivid print results. For tumbler wraps, that means logos and lettering keep their edge after the press.

Choose it for small batches and bold designs. Skip it if you print daily and need a larger count.

Koala Sublimation Paper 8.5x11 Inch 100 SheetsCheck it on Amazon
9

Joyclub Sublimation Paper 8.5x11 Inch 110 Sheets: Best for fast-dry coated sheets

Joyclub Sublimation Paper 8.5x11 Inch 110 Sheets, sublimation paper for tumblers
8.1/10Our score
  • 8.5x11 inch, 110 sheets
  • 120g coated paper
  • Fast drying
  • High transfer rate

A 120g 8.5x11 inch coated sheet in a 110-sheet pack, made to dry in seconds and lock ink to the surface.

See it on Amazon

Pros

  • 120g weight for tumbler wraps
  • 110 sheets per pack
  • Coated surface dries fast

Cons

  • Smaller maker range than the top picks
  • 8.5x11 inch size only

This Joyclub pack suits makers who want a fast-dry coated sheet for tumblers and mugs. The sheet is 120g, 8.5x11 inch, with 110 sheets.

Joyclub says the coated surface dries in seconds and locks ink to the surface.

That fast dry finish helps reduce smudging, ink bleeding and ghosting on the press. Joyclub also states a high transfer rate for bright colors on polyester fabric and coated hard substrates.

For tumblers, that means less ink movement while the wrap heats.

The trade-off is range. This pack is 8.5x11 inch only, and the brand range is smaller than the top picks here.

Print on the blank side, mirror the image and use only sublimation ink. The paper suits T-shirts, mugs, tumblers and tote bags in white or light colors.

Joyclub lists hoodies, pillows, mousepads, water bottles, phone cases, keychains and photo panels as well. That mix suits craft sellers who pair drinkware with flat items.

The ink-resistant coating is meant to keep the heat press clean, which saves time between blanks.

The 120g weight sits in the middle of this group, so it balances wrap ease and flatness. Choose it for everyday crafting and seasonal batches.

Skip it if you need an 11x17 inch sheet or a very large pack.

Joyclub Sublimation Paper 8.5x11 Inch 110 SheetsCheck it on Amazon

How to compare sublimation paper for tumblers

The packs that lead here share four traits: coated 8.5x11 inch or 11x17 inch sheets, weights from 105g to 125g, stated transfer rates near or above 98%, and fast dry coatings. The differences are size, weight and sheet count.

ProductBest forSheet sizeSheet countPaper weightOur score
A-SUB Sublimation Paper 8.5x11 Inch 110 Sheetsmost tumbler makers8.5x11 in110125g9.7
HTVRONT Sublimation Paper for T-Shirts & Mugmixed tumbler and shirt work8.5x11 in150120g9.6
HTVRONT Sublimation Paper 11x17 Inchfull-wrap tumbler designs11x17 in120120g9.5
Hiipoo Sublimation Paper 8.5x11 Inchguided print settings8.5x11 in110120g9.4
A-SUB Sublimation Paper 8.5x11 Incheconomical everyday batches8.5x11 in150105g9.3
Lzerking Sublimation Paper 8.5x11 Inch 125gsmhigh-volume tumbler runs8.5x11 in400125gsm9.2
Koala Sublimation Paper 8.5x11 Inches 150 sheetsthin paper that wraps tumblers8.5x11 in150105gsm8.8
Koala Sublimation Paper 8.5x11 Inch 100 Sheetsthick paper and small batches8.5x11 in100120g8.5
Joyclub Sublimation Paper 8.5x11 Inch 110 Sheetsfast-dry coated sheets8.5x11 in110120g8.1

We compared each pack on sheet size, weight, count and stated transfer rate. We also checked which side prints, how the sheet wraps and whether the pack suits small or bulk runs.

Heavier paper near 120g to 125g holds more ink and stays flat. Lighter paper near 105g wraps tapers with less effort.

Sheet count changes cost per run more than brand name does.

What to check first

Check sheet size against your tumbler height before you check brand. Check weight against your blank shape next.

Check sheet count against your weekly output last.

What size sublimation paper fits a tumbler wrap

8.5x11 inch paper fits most tumbler designs after trimming. 11x17 inch paper fits tall full wraps in one piece.

Measure the blank height and circumference before you print.

8.5x11 inch sheets

8.5x11 inch sheets are the default for tumblers, mugs and phone cases. Trim the sheet to the wrap height and tape the seam flat.

This size suits most printers.

11x17 inch sheets

11x17 inch sheets suit tall tumblers and full-wrap art. They remove seams but need a printer that takes the size.

Position the larger sheet with extra care.

If shirts are part of your work, see best sublimation paper for t shirts. If you buy by the roll instead, see best sublimation paper roll.

How do paper weight and transfer rate affect tumbler prints

Paper weight and transfer rate decide how much ink reaches the tumbler coating. Heavier paper holds more ink.

A high transfer rate moves more of that ink onto the blank.

105g paper

105g paper is thin and easy to wrap. It suits curves and tapered blanks.

Tape it firmly so it does not shift.

120g to 125g paper

120g to 125g paper is thicker and flatter. It suits straight sides and large designs.

Trim edges well so thick paper sits flush.

Expected transfer rates cluster near 98% in this group. A-SUB states at least 98% on its 125g sheet.

HTVRONT, Hiipoo, Koala and Lzerking state rates over or up to 98% on their sheets.

Cotton content and coated blanks

Sublimation paper suits light polyester fabric and coated hard blanks. Material with cotton content up to 30% is the limit listed across most packs.

Dark fabric and uncoated metal will not take the transfer.

What printer and ink work with sublimation paper for tumblers

Sublimation paper works only with sublimation ink in a compatible sublimation or converted inkjet printer. Regular ink does not transfer onto coated tumbler blanks.

Our Best Sublimation Printer For Tumblers guide covers printer fit. If you are still deciding, What Is the Best Sublimation Printer for Tumblers? explains the trade-offs.

Print in mirror image and check the print side before you load the sheet. Rows of prints go fastest when you confirm side, size and mirror setting on the first sheet.

Laser printers do not work for this paper. Only inkjet printers with sublimation ink can carry the design onto a tumbler coating.

How should you print, tape and press a tumbler wrap

Print the design in mirror image on the coated side. Trim the sheet, tape it tight to the blank and press at the settings for your tumbler coating.

Use sublimation ink and the printer settings for sublimation paper. Hiipoo suggests Premium Presentation Paper Matte and High quality on Windows.

Test one print before a full batch.

Taping and pressing

Tape the seam flat with no air gaps. Press the blank per its maker settings.

Peel after heating is finished and check color before you change settings.

A dull paper print is normal. Color turns vivid only after heat moves ink into the coating.

Finish the press before you judge color or change settings.

How should you store sublimation paper between runs

Store paper in a cool, dry place away from direct sunlight and humidity. Return unused sheets to the box after each print session.

Heat and moisture can harm the coating before you print. That risk grows with large packs such as the 400-sheet Lzerking pack.

Keep the box closed and off the floor.

Storage for bulk packs

Bulk packs need flat storage with no bending at the edges. Bent sheets can jam the printer or lift at the tape line.

Keep the box closed between runs to limit dust and moisture.

Our verdict on the best sublimation paper for tumblers

Pick the A-SUB 125g 8.5x11 inch pack for most tumbler work. Pick the HTVRONT 11x17 inch pack for tall full wraps.

Pick the Lzerking 400-sheet pack for high-volume runs.

For mixed tumbler and shirt work, the HTVRONT 150-sheet pack is the balanced pick. For thin paper on curves, the Koala 105gsm pack wraps with less effort.

For guided print setup, the Hiipoo pack gives clear steps.

Match paper size to your blank, weight to your taper and sheet count to your order volume. That rule will serve you better than brand loyalty alone.

Our top 3 picks at a glance

  1. 1 A-SUB Sublimation Paper 8.5x11 Inch 110 Sheets
    Best for most tumbler makers

    A-SUB Sublimation Paper 8.5x11 Inch 110 Sheets

    9.7/10 our score

    See it on Amazon
  2. 2 HTVRONT Sublimation Paper for T-Shirts & Mug
    Best for mixed tumbler and shirt work

    HTVRONT Sublimation Paper for T-Shirts & Mug

    9.6/10 our score

    See it on Amazon
  3. 3 HTVRONT Sublimation Paper 11x17 Inch
    Best for full-wrap tumbler designs

    HTVRONT Sublimation Paper 11x17 Inch

    9.5/10 our score

    See it on Amazon

Frequently asked questions

What size sublimation paper should I use for a tumbler?

Use 8.5x11 inch paper for most tumbler designs and trim it to the blank's wrap height. Choose 11x17 inch paper when a full wrap needs to print in one piece without a seam.

Measure your tumbler first, since tall and tapered blanks need different wraps.

Does sublimation paper weight matter for tumblers?

Yes. Heavier paper near 120g to 125g holds more ink and stays flatter during the press.

Lighter paper near 105g wraps curves with less effort but can shift more easily.

Match the weight to the size of your design and how tightly you tape the wrap.

Can I use regular inkjet paper for tumblers?

No. Sublimation paper only works with sublimation ink in a compatible sublimation or converted inkjet printer.

Regular ink does not transfer onto coated tumbler blanks.

Print the design in mirror image so it reads correctly after the press.

Why do tumbler prints look dull before pressing?

A dull print is normal before heat is applied. Sublimation ink looks muted on paper and turns vivid on the blank after transfer.

Finish a test press before you change colors or settings, since the paper print alone does not show the final result.

How should I store unused sublimation paper?

Store unused sheets in a cool, dry place away from direct sunlight, heat and humidity. Put remaining sheets back in the box after each use.

Moisture and heat can affect the coating before you print.