Guide

How to Connect Cricut Explore Machines with Bluetooth

Updated on · By the 10 Top Rated Reviews team

Cricut Explore Air 2 Bluetooth is built in, so pairing takes a few minutes in Design Space. Turn the machine on, enable Bluetooth on your computer or phone, and select the machine name in Design Space. Older Explore models may need a Bluetooth adapter, so check your exact model first.

On this page (10 sections)
  1. Is the Cricut Explore Air 2 Bluetooth enabled out of the box?
  2. Which Explore machines have built-in Bluetooth and which need an adapter?
  3. How do you pair a Cricut Explore Air 2 with a computer?
  4. How do you connect a Cricut Explore Air 2 with a phone or tablet?
  5. How does Bluetooth work on the Cricut Explore 5 compared with older models?
  6. What supplies make Bluetooth cutting easier once you are connected?
  7. Which tools can you add once your Explore machine is connected?
  8. Why does my Cricut Explore keep disconnecting during a cut?
  9. Can a USB cable help when Bluetooth will not pair?
  10. What is the final checklist for reliable cricut explore air 2 bluetooth use?

Cricut Explore Air 2 Bluetooth is built in, so you do not need an adapter to connect it. Power on the machine, turn on Bluetooth on your device, open Design Space, and choose your machine from the list.

This guide covers each model difference and the fixes that clear most pairing problems.

Is the Cricut Explore Air 2 Bluetooth enabled out of the box?

Yes, the Explore Air 2 has Bluetooth built in and needs no adapter. You connect it wirelessly through Design Space on a compatible computer or phone.

Built-in Bluetooth means no extra part goes in the accessory port. The machine name appears in Design Space once Bluetooth is on and the machine is powered on.

You still need a compatible device and an internet connection for Design Space. Bluetooth links your device to the machine, while Design Space handles the design and cut commands.

Keep the machine within a normal room distance during pairing. Walls, interference, and a low device battery can slow the search.

Which Explore machines have built-in Bluetooth and which need an adapter?

Explore Air, Explore Air 2, and Explore 5 have built-in Bluetooth, while Explore and Explore One need an adapter. Check that split before you buy parts.

If you own an Explore Air 2, skip the adapter. The pairing steps below apply directly, with no accessory port hardware needed.

If you own the original Explore or Explore One, you need the Cricut Bluetooth adapter. It fits in the accessory port and adds wireless pairing for those older models.

For a clear comparison of the early models, see cricut explore vs explore air. For the two Air models side by side, see cricut explore air vs air 2.

How do you pair a Cricut Explore Air 2 with a computer?

Open Design Space, select your machine, and follow the prompts until the machine name is confirmed. The full sequence takes only a few minutes on a first setup.

Start with the machine plugged in and switched on. Turn on Bluetooth on your computer and check it is not in airplane mode.

Open Design Space and choose to set up a new machine or connect a machine. Design Space will search for nearby Cricut machines and list the name to select.

Select your Explore Air 2 from that list. Confirm any Bluetooth access prompt, then wait for Design Space to finish.

Once connected, try a small test design first. A simple cut confirms both directions of the connection work.

For daily use after pairing, read how to use cricut explore air 2.

How do you connect a Cricut Explore Air 2 with a phone or tablet?

Install Design Space on the device, turn on Bluetooth, and select the machine name in the app. Mobile pairing follows the same idea as computer pairing, with one extra permission step.

Open the Design Space app and sign in. If the app asks for Bluetooth permission, allow it, since the app cannot find the machine without that access.

Power on the Explore Air 2 and keep the phone or tablet close by. Open the machine selection area and wait for the name to appear.

Tap the machine name and confirm the connection. The app may ask you to confirm a prompt, so follow the on-screen steps in order.

If the name does not appear, switch Bluetooth off and back on, then try again. Also check that no other device nearby is already connected.

What should you check if Design Space cannot find the machine?

Check power, Bluetooth settings, distance, and stale pairings first. Most failed searches come from one of those four causes.

Confirm the machine is plugged in and the power light is on. A switched off machine will never appear.

Confirm Bluetooth is on for the specific device you are using. Laptops and phones sometimes have Bluetooth off after an update.

Move the device closer and remove anything blocking the path. Short distances work best during the first pairing.

Remove old pairings from your device settings, then restart Design Space. Re-pairing from a clean state often clears a missing name.

How does Bluetooth work on the Cricut Explore 5 compared with older models?

The Explore 5 also connects through Bluetooth to Design Space on a computer or phone. Cricut describes the Explore 5 as connecting through Bluetooth to Design Space on mobile or desktop devices.

The Explore 5 is a 12 in (30.5 cm) machine and is described as 30% more compact than previous models. It precision-cuts 100 or more popular materials, including vinyl, iron-on, cardstock, and printable materials.

The pairing logic is the same across Air 2 and Explore 5. You power on the machine, enable Bluetooth on your device, open Design Space, and select the machine.

A working Air 2 does not need replacement for Bluetooth reasons alone. The bundle only matters if you want a newer machine.

What supplies make Bluetooth cutting easier once you are connected?

A good mat and the right tool for your material matter more than the wireless link itself. Bluetooth sends the design, but the mat holds the material still during the cut.

The WORKLION set includes three 12 x 24 in mats with standard, light, and strong adhesive. The standard mat suits cardstock, printable paper, iron-on, vinyl, washi, and window cling.

The strong mat suits thicker cardstock, faux leather, poster board, chipboard, and fabric with a backing. The light mat suits light cardstock, office paper, vinyl, vellum, and other light materials.

Keep the clear film cover on a mat when you store it. That cover keeps paper scraps and dust off the adhesive for the next cut.

Which tools can you add once your Explore machine is connected?

Once paired, you can run any compatible tool through Design Space without a cable. Bluetooth only carries commands and status, so it does not limit tool choice.

The Cricut Foil Transfer Kit works with Cricut Explore machines and adds shine to cards and invites. It includes 12 foil sheets in gold and silver at 4 x 6 in, three interchangeable tips in fine, medium, and bold, one tool housing, and tape.

The system is pressure-activated and needs no heat. You follow the Design Space prompts, run the cut, then peel back the sheet to reveal the foil.

A stable link matters for multi-step tool changes. Pair once, confirm the machine name, and keep your device nearby for the whole project.

Why does my Cricut Explore keep disconnecting during a cut?

Usually the cause is distance, interference, a sleeping device, or another app holding the connection. A short reset fixes most drops without reloading material.

Move your laptop or phone closer before you restart the cut. Bluetooth works best with a clear path and less crowding.

Check that your device is not going to sleep during the cut. A sleeping laptop or locked phone can break the link even when the machine is fine.

Close other apps that might hold a Bluetooth connection to the machine. If two devices compete, the active Design Space session can drop.

If the cut stops, leave the material in place and restart from Design Space. That approach saves material when the design is partly cut.

Can a USB cable help when Bluetooth will not pair?

Yes, a USB connection is a useful backup while you troubleshoot Bluetooth. Wired mode confirms that the machine and Design Space work before you chase a wireless fault.

Connect the machine to your computer with a USB cable and open Design Space. If the machine appears over USB, the hardware is fine and the problem sits with Bluetooth or device settings.

Use that wired session to update Design Space and check settings. Then disconnect the cable and try Bluetooth pairing again from a clean state.

USB is also practical for long runs at a desk. If the computer stays close to the machine, a cable removes wireless pairing from the equation.

For a wider view of cutting machines beyond Cricut, our guide to craft cutting machines covers the full category. For bundle options, see the best cricut explore bundle picks.

What is the final checklist for reliable cricut explore air 2 bluetooth use?

Power on the machine, enable Bluetooth, open Design Space, select the machine name, and test with a small cut. That sequence works for the Air 2 and newer Explore models with built-in Bluetooth.

Check your exact model before buying anything. Explore Air 2 owners need no adapter, while original Explore and Explore One owners need the adapter.

Keep your device close during pairing and multi-step projects. Remove stale pairings, restart Design Space, and use USB as a backup if the name will not appear.

Choose your mat and tool for the material, not for the connection. A matched mat grip and the right tool tip matter as much as a clean wireless link.

For other wireless topics, see Best Wireless Printer For Photos and Best Wireless Printing Printer. For a different brand workflow, see how to use silhouette cameo 4.

Frequently asked questions

Is Bluetooth built into the Cricut Explore Air 2?

Yes, the Cricut Explore Air 2 has built-in Bluetooth and does not need a separate adapter. You pair it through Design Space on a compatible computer or mobile device, and you can then send designs wirelessly within range.

Does the original Cricut Explore have Bluetooth?

No, the original Cricut Explore and Explore One do not have built-in Bluetooth. They need the Cricut Bluetooth adapter in the accessory port, while Explore Air, Explore Air 2, and Explore 5 have Bluetooth built in.

Why is my Cricut Explore Air 2 not showing up in Design Space?

Check that the machine is powered on, Bluetooth is enabled on your device, and no other app is holding the connection. Restart Design Space, move devices closer together, and remove stale Bluetooth pairings before trying again.

Can I use my phone to connect a Cricut Explore Air 2?

Yes, Design Space on a compatible phone or tablet can connect by Bluetooth. Keep the phone near the machine during pairing, allow Bluetooth permission when prompted, and update Design Space if the machine name does not appear.